Manufacturer: Control-X
Availability: in stock 1 item(s)
Product Code: RADRM4268-532


A dual column system with motorized tube stand in slave configuration to the wall stand. After adjusting the height of the digital detector to the patient size and pressing the „GO” button, the X-ray tube drives in position centered to the digital panel. Optional motorized movement on the wall stand is available. 

  • Long vertical travel allows for the lowest and highest exposure positioning in unison with tube stand
  • Fully counter-balanced, double rope system for safety
  • Electrical lock for easy positioning and permanent placement, manual drive
  • Detector heights can be adjusted according to the patient height, and using the tracking push-button the TS 99 CHEST Stand moves the tube in the required height
  • Panel cover has permanent cross-lines and AEC field’s marks for easy patient positioning.
  • Wall box with terminal strips and cable covering hosing for professional look installation.
  • Special grid cabinet (for fixed grid, 215 LPI, 10:1) for full-size Flat Panel Detector.
  • AEC detector
  • 0.6 / 1.2 mm focus, 18/50 kW, 300 kHU, 12° target angle
  • 10 m standard (longer cable pairs available)
  • High/Standard Speed. 
  • Fixed SID
  • X-ray tube follows receptor center
  • Full DX modality
  • 50 kW – 80 kW, 100 kHz, 400 to 1000 max mA, 40 to 150 kV range (depending on X-ray tube selected - please inquire for X-ray tube upgrades
  • Power Requirements: 208- 400VAC three-phase (please specify input power when ordering)
  • Optional line matching transformers are available for an additional cost
  • Optional single-phase stored energy version up to 50 kW; 6.5 / 10 / 20 or 30 kWs stored energy (approx. 65/100/200/300 mAs exposures @ 100 kV)
  • Microprocessor control delivers reliable and accurate exposure parameter management
  • Can operate as a three-point (kV, mA and time), or a two-point (kV and mAs) or AEC technique selection generator
  • Optional interface for AEC, high speed starter, DAP 
  • Rapid automatic calibration mode reduces installation time
  • Automatic tube protection and safety interlocks are standard features
  • Compact Size: 60 cm x 40 cm x 50 cm (L x W x D), SE version (20/30 kWs): 90 cm x 40 cm x 50 cm
  • Motorized vertical movement, tracking with the WS 99 CHEST stand
  • Electrical locks with clutches, manual movement allowed
  • Very quiet, “Easy-glide” effortless operation with quality bearing systems
  • Fully counter-balanced, spring-loaded system
  • Trunnion ring for the x-ray tube, plastic cover.
  • Floor-only mounting, fixed SID to the chest stand 
  • 43 cm x 43 cm image size - no rotation required
  • Pixel matrix 3008 (H) x 3072 (V)
  • Pixel pitch 143 µm