Summit InnoVet Versa X-Ray

The Versa design serves aesthetic, acoustic and protective purposes. Versa’s signature high-density and durable plastic exterior showcases a glossy finish that is easy to clean and never rusts. Versa’s unique molded corners prevent hip-level bruising that is common to veterinary technicians. A fully-encased tubestand and cover safeguard staff & patients from exposed electrical wires. Table-level animal restraints, which come standard, minimize unnecessary technician exposure to radiation. Both Versa and Versa DR come standard with a High Frequency generator and versatile integrated tubestand. Like all InnoVet products, Versa can be customized to meet the specific needs of your practice. SPACE REQUIREMENTS • Minimum ceiling height:  85" (included 2.8" clearance above top of column to allow +/- 60 degrees of tube angulation) MOUNTING • Bolts to floor are recommended. • HV transformer & generator’s power module can be located on shelf in table base ELECTRICAL ACCESS • All cables enter from rear or side of table. • Front covers of table are removable for internal access. ELECTRICAL REQUIREMENTS (For Summit 30kW 20kHz HF X-ray generator) • 240 VAC, single phase, 100 Amp disconnect, 200 Amp maximum momentary load. • 37.5 kVA distribution transformer • Maximum line voltage drop under full load conditions not to exceed 5%. • Recommended copper wire sizes are #2 for 50’ run, #00 for 100’ run, 250 MCM for 200’ run. o (Run is distance between distribution transformer and service disconnect) • Line voltages below 230 VAC require an optional step-up transformer o (The optional step-up transformer mounts inside generator’s power module) • The generator provides 24 VDC and 24 VAC supply voltages for table locks (4-way float top table only) and collimator, respectively.